Text to CADu/layerlines6h ago Solved
Asked for “a 30° camera mount for a 5-inch frame, 20mm stack, under 10 grams.” Got a STEP file and a 3D preview in under a minute.
Printed in PETG, 9.4 grams, and it fit first try. Ran it through the sim at 90 mph before flying it for real.
How it turned out
Printed first try at 9.4 g and flying. The 35° lattice version came in under 10 g too.
Print this mount: PETG, shipped
Fits your build · arrives Friday
$9.00
Nothing is actually ordered or flown — this shows how it works.
Sky5h agoAI answer · pinned
The 35° version needs a thicker brace to stay stiff, which adds weight. If you ask for “35°, under 10 grams, allow a lattice brace,” I'll trade some solid material for a lattice and keep it under 10 grams.
u/cad_curious5h ago
What infill did you use? I tried the same prompt with a 35° angle and mine came out 12 grams.
u/layerlines4h ago
20% gyroid, 3 walls.